After the Bearing was removed, I found that it is wearing out. The thought of have the bearing replaced was not materialized as the inventories that I have don't have the same size as the one on the Daiwa Millionaire Proteus 300.
**Share this video by copying this link
**Watch my trip at Air Papan Beach with the Bait Launcher here
**Subscribe now by clicking this link
**Check out my other videos by clicking this link
I decided to go a step further and did the Ultimate Bearing Servicing that I had learned from a fishing blog many years ago. I did the trick onto my Abu Garcia's Bearing and it's performance was greatly improved.
Small hiccup forced me to paused for around half an hour as the Retaining Clip for the Bearing flew off to nowhere. Fortunately it was found and the Bearing was reinstalled properly.
The end result was remarkable as the Spool is spinning smoothly again, it would perform better after the fishing line is replaced and aligned in order.
In part 5 as well as the final installment, I put back everything and the Daiwa Millionaire Proteus 300 is ready to be upgraded to the next level. It will be fitted with the DIY Mono Mag which will be featured in the DIY Mono Mag series. So, don't touch that dial and stay tuned on this channel.
=============================================
Please give me your valuable comments to help me making improvement and click the LIKE and SHARE if you find the video is good. Subscribe to my channel for the latest update on the new videos.
You can reach me @
NorthernHardcoreFisherman @ Google+
NorthernHardcoreFisherman @ Facebook
NorthernHardcoreFisherman @ Instagram
NorthernHardcoreFisherman @ Twitter
NorthernHardcoreFisherman @ Tumblr
=============================================
Always Tight Line, Hardcore is the Spirit!
0 comments:
Post a Comment